Your Manual For D-Link Range Extender Setup

Want to have optimal coverage of your wifi router network? Then you need to shift to a wifi extender which increases the wifi signals and improves the stability of your network connection. So what better than a D-Link wifi range extender. The D-Link range extender setup can be done using WPS push button method and web browser method. Hook to this blog to know a step-by-step guide for dlink wifi extender setup. 

A Step-by-step Guide For D-Link Extender Setup Using WPS Method:

  • The first step is to position the D-Link wifi range extender in the same area as your current WiFi router.
  • Now, plug the wifi extender into a functional electronic socket.
  • Press the WPS push button on the wifi router after 60 seconds.
  • Now, check if the LED light indicator turns green.
  • The green LED light will turn steady green once the wifi router and D-Link wifi range extender are successfully connected.
  • The next step is to detach the D-Link wifi extender and place it where the signal range was poor.

A Step-by-step Guide For D-Link Extender Setup Using The Web Browser Method:

  • First of all, link your D-Link wifi range extender to the computer or laptop using an Ethernet cord.
  • On your PC device, launch the wireless utility function.
  • After thatz choose the network name or SSID of your wifi extender and fill in the passphrase.
  • Now, open a default web browser on your system and in the web address bar type dlinkap.local.
  • You can also access the D-Link admin web interface using the default gateway address 192.168.0.50.
  • This will redirect you to the login page for D-Link wifi extender.
  • Fill in the required login credentials in their respective fields and press the login tab. 
  • After landing on the configuration web page, tap on the ‘Setup’ tab. 
  • The next step is to open the D-Link wifi range extender setup wizard and do as prompted.
  • Start with the configuration settings for the wireless and security settings of the wifi range extender.
  • Finally, tap on the finish tab to successfully complete the D-Link wifi range extender setup.
  • After completing the setup process, restart the D-Link wifi range extender and then connect with other devices.

A Step-by-step Guide For D-Link WiFi Range Extender Login:

  • Firstly, keep the D-Link wifi range extender in a suitable area.
  • Then, link your PC device to the wifi range extender’s network using an Ethernet wire.
  • Now, plug the D-Link wifi extender into a functional AC socket and then switch it on.
  • Now you must connect your computer or laptop to the wifi network.
  • Next, enter the URL http://dlinkap.local in the web browser’s address field then press the enter key.
  • You can also use the default IP address 192.168.0.50 to get into the D-Link Extender’s admin web page.
  • Here you have to login using the username and password on the login page and then hit the login tab.

D-Link WiFi Extender Ready To Use!

D-Link range extender setup is now complete and then you can proceed to connect it to your wifi-compatible devices. It extends the wifi router’s network to network dead spots even. The D-Link wifi extender setup is easy and quick to perform. Enjoy the fast internet with just a few steps.

Location: New York, NY, USA

Comments

Post a Comment

Popular posts from this blog

Easy Steps For Belkin Wifi Range Extender Reset

Image
Belkin wifi range extender extends the internet to dead regions of the house. It also increases the range extender speed up to 300 Mbps which makes your video watching experience a smooth ride. But, if your Belkin wifi range extender has stopped working or you want to change the configuration settings then you need a solution for that. Do you wish to reinstall or reconfigure the settings of your Belkin wifi range extender? Then you have stepped on the right stone. This blog is about Belkin wifi range extender reset . For Belkin range extender reset you just have to follow the steps mentioned in this blog carefully. Stepwise Instructions To Perform The Belkin Wifi Range Extender Reset –   If you don’t remember the login information of your Belkin wifi range extender then, reset the device to its default factory settings and get the default login credentials back to enter your extender’s settings; Firstly, look for the circular button on your wifi range exten...
Read more

Netgear Wifi Extender Keeps Disconnecting - Why And How To Solve?

Image
Did you just say that your Netgear wifi extender keeps disconnecting ? Well, undoubtedly Netgear wifi extender is the best in its league but, this issue is reaching us more nowadays. When you are connected to it Netgear wifi extender keeps disconnectin g then this will obstruct all your tasks whether you are working, streaming videos or music, or playing games. In this blog, we will discuss some common causes of this problem and also throw some light on its solutions. Common Causes Why Netgear Wifi Extender Keeps Disconnecting –  Before moving ahead with the troubleshooting tips to fix the issue, it is very crucial to understand the root causes of it. Read the following points to understand its causes; The wifi extender is not placed properly or in a proper location. If you are linked to an incorrect wifi network then you will face this issue. If the firmware version of the Wifi extender is outdated or old. If the Netgear wifi extender setup didn’t happen p...
Read more

How To Perform Belkin Wifi Range Extender Reset?

Image
Belkin has launched so many wifi extenders. Most of these extenders have a hard reset button, pressing which the wifi extender will go back to its default factory settings. It restores the settings that the device had at the time of arrival from the company. In case the device acts weirdly then you need to perform a Belkin wifi range extender reset . For the Belkin wifi range extender reset , hop onto this blog and know the detailed steps work. Here we will also discuss two different ways to do the Belkin wifi extender reset . Stepwise Guide To Do The Belkin Wifi Range Extender Setup –  Look for a properly functional and stable power supply socket and then plug the Belkin wifi range extender into that socket. During the reset process, the power supply should be consistent and there should be no breakage or damage to the power wires. Any discrepancy with the power connection will erase your device’s memory and it might not be able to extend the network anymore....
Read more