Easy Steps For Belkin Wifi Range Extender Reset

Belkin wifi range extender extends the internet to dead regions of the house. It also increases the range extender speed up to 300 Mbps which makes your video watching experience a smooth ride. But, if your Belkin wifi range extender has stopped working or you want to change the configuration settings then you need a solution for that. Do you wish to reinstall or reconfigure the settings of your Belkin wifi range extender? Then you have stepped on the right stone. This blog is about Belkin wifi range extender reset. For Belkin range extender reset you just have to follow the steps mentioned in this blog carefully.

Stepwise Instructions To Perform The Belkin Wifi Range Extender Reset –  

If you don’t remember the login information of your Belkin wifi range extender then, reset the device to its default factory settings and get the default login credentials back to enter your extender’s settings;

1. Firstly, look for the circular button on your wifi range extender’s backside.
2. Then use a pointed object such as a pin or paperclip to press the Reset button as it is a very tiny button.
3. Keep holding the reset button for nearly 10-15 seconds and check if all the LED light indicators are blinking or not.
4. After 10-15 seconds release the reset button and then, restart your Belkin wifi range extender.
5. After that, let your wifi range extender be idle for 1 minute so that it can properly reboot and then restore the default factory settings.
6. Now, your Belkin wifi range extender is fully reset and all set for configuration.
7. Install the wifi extender now.
8. After that start setting up your wifi range extender.
9. To find the username and password that are set by default for your Wifi range extender, check the bottom label or the box of the router.

Stepwise Instructions To Set Up The Belkin Wifi Range Extender – 

Once you have completed resetting your Belkin wifi range extender you can easily set it up starting from the default settings. Follow the steps listed below to set up your Belkin wifi range extender;

1. The first and foremost step is to plug your wifi range extender into the power supply socket and the switch on the computer.
2. After you have restarted both the extender and the PC device, go to the wifi settings.
3. Here you will observe the network name or SSID Belkin Wifi Range extender. 
4. Click on it to connect to the extender.
5. After that, launch the default web browser and it will automatically redirect you to the Wifi Range Extender Setup Page.
6. Now, keep following the instructions and choose your wireless router network’s name and enter the password.
7. To proceed, click on the next tab now.
8. After your Belkin wifi range extender’s configuration is complete, plug it anywhere in the house and receive extended signals in every corner.

Belkin Wifi Range Extender Reset Successful!

By following the above blog you can easily do the Belkin wifi range extender reset and then you can proceed to set up. The Belkin range extender reset will set the extender to its default factory settings. This way you don’t need the old password to log into your extender’s configuration settings. The default username and password can be found at the rear of the extender body. Use the default credentials to get into the configuration settings and manage your extender.