How To Do The Setek WiFi Extender Factory Reset?

Tired of the network dead zones at your home? Tired of shifting from one place to another place to receive internet signals? Setek wifi range extender is here to reduce all your worries. More than increased signals, it is known for its network area coverage. It covers up to 2500 sq. ft area which means, there are no more dead zones. But, a setek factory reset is required when your Setek extender is not working even after so many attempts. Here, we will guide you to do a Setek wifi extender factory reset. 

Steps To Setup Setek Wifi Range Extender With Wifi Router:

Before straightaway diving into the reset steps of the Setek wifi range extender, let’s see how it is set up with your wifi router. It is connected to the wifi router using an ethernet cord, read out the following tips to set up your Setek wifi range extender:

• Start by plugging in your wifi extender and wifi router into the electrical socket.
• To have a better connection, ensure that the router and extender are placed closely.
• Now wait patiently for the green LED light to fluctuate.
• Then, press the WPS button on your extender for 2 seconds. Do the same with the wifi router.
• Now, a light will be blinking on both the wifi range extender and wifi router.
• The connection between the extender and router might take a few seconds.
• The WPS light on the Setek extender will turn solid green once it is connected to the router.
• Finally, unplug your range extender and plug it in a new electrical socket where you need the most network coverage.

Steps To Perform The Setek Wifi Extender Factory Reset:

The reset function in wifi range extenders is very helpful in case your wifi range extender is not working. Even if you have tried all the steps to troubleshoot the Setek range extender the last resort is to reset the setek extender to its default settings. Follow the easy guidelines stated below to perform the reset:

• Firstly, look for the reset button on your Setek wifi range extender and press it for 10 seconds.
• Now, wait for the LED light to turn red.
• Then, wait patiently for 30 seconds before reaching the Setek wifi extender.
• Next, enter the default gateway address in the address field. 
• The default IP address is 192.168.50, make sure you enter the correct IP address.
• On the right side of your computer’s screen, tap on the management tab.
• Look for the restore factory settings button and then click on it to proceed.
• A warning prompt will appear on your screen asking to confirm your action. 
• Hit the OK button and continue with the factory reset.

That’s it, the Setek factory reset is complete after these steps. It is very easy and convenient to perform the factory reset option.

Setek Reset Complete!

After going through the following steps you know how to perform the Set factory reset. Once you complete the setek wifi extender factory reset you will now be able to enjoy your extended network without any issues. Enjoy the extended network and improved signals.